SVR The Only Lubricant Conditioning System (Remove - Achieve - Restore - Maintain)
Lubricant varnish forms when a lubricant’s capacity to hold dissolved oil breakdown products is exceeded.
When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect. The SVR Lubricant Conditioning System is the proven solution to make varnish vanish!
When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect. SVR skids prevent and remove varnish deposit formation in lube oil by removing oxidation by-products as they are formed and while they are still in solution (dissolved). By removing the soluble varnish feed stock SVR is addressing the primary cause of varnish before varnish deposits can form. Stop varnish before it stops you!
EPT‘s SVR removes and prevents accumulation of these dissolved oil breakdown products during normal turbine operation so that lubricant varnish cannot form – period.
The SVR system targets and eliminates the primary cause of varnish formation; whereas, all other systems (electrostatic, agglomeration, and depth filtration) must wait for varnish to form before they are of any value.
Key Benefits of SVR Lubricant Conditioning Systems
- ICB filter purification technology for soluble varnish contaminant removal:
- Quickly reduces and prevents servo valve sticking
- SVR system quickly reduces varnish potential in large gas turbines as measured by the MPC tests
- Unlike particulate removal technologies, SVR works all the time including operating conditions when varnish is dissolved in the oil
- Eliminates the varnish formation cycle that typically occurs when the oil cools during turbine shut down
- Removes all forms of varnish (solid and dissolved)
- Low cost of ownership over 10 years with defined consumable costs
- ICB filter cartridges are changed annually when installed on common sized reservoirs and used in maintenance mode
- Small footprint and straight-forward operation
- Low maintenance: Turn it on and let it run, that’s it!
- Guaranteed to work with comprehensive analysis included at no charge until results are documented
SVR restores the solubility of the oil by removing the soluble varnish causing contamination that other technologies can’t. By restoring solubility SVR enables the oil to chemically remove previously formed varnish deposits and reduce MPC varnish potential numbers from condition critical red to condition normal green.
The SVR 1200 removes varnish, restore lubricant as it is condition, maintain lubricant as it is condition, maintains lube reservoir MPC value to single digits, maintains antioxidants (phenol & amine) as it is condition, restore lubricant demulsibility, improve total acid number,…and the list goes on.
Talk to us
