The CFU series portable Compact Filter Unit is designed for small gearboxes or reservoir conditioning and fluid transfer. The pneumatic driven pump option is ideal for explosion proof environment and material delivery systems as well as conveyors with many small gearboxes. The configuration of two elements in series reduces fluid processing time and allows balanced use of high efficiency glass media that can be combined with water removal capabilities.
Weight: 30 Lbs (14 Kg) – 55 Lbs (25 Kg)
Dimensions: 14″ (356 mm) W x 17.5″ (445 mm) L x 20″ (508 mm) H
COD coalesce skids rapidly remove water from diesel fuel > 99% single pass water removal efficiency and high efficiency particulate filtration.
COD coalesce skids rapidly remove water from diesel fuel > 99% single pass water removal efficiency and high efficiency particulate filtration. Units available up to 200 gpm / 750 lpm for high volume treatment of bulk diesel tanks. Typical applications include diesel tank farm bulk fluid conditioning, tanker truck filling transfer and filtration, stand-by diesel storage tanks (hospitals, emergency response), and more.
Diesel fuel cleanliness is more critical than ever with increasing combustion pressures and sensitivity of fuel injectors. Keep diesel fluids clean for reliable and fuel efficient engine operation and to keep stand-by fuel reserves ready for service.
COT turbine oil coalesce skids rapidly remove water from turbine oil with > 95% single pass efficiency, control particulate to 16/14/11 and lower. COT skids are available to handle reservoirs up to 20,000 gallons and feature all synthetic media elements for pre-filter, coalesce, separation and post-filter.
Auto-water drain allows for 24×7 continuous unattended operation. On-board heaters help keep turbine lube reservoir warm even when the turbine is down maximizing coalesce efficiency and ensuring that fluid is in pristine condition when the turbine is ready to come back on-line.
ECR™ electrostatic removes submicron particles created by thermal degradation in hydraulic or lube oil. Ideal for steam turbine EHC systems with dark fluid.
ECR™ electrostatic contamination removal system captures sub-micron carbon based particles that are the by-product of hydraulic and lube oil thermal degradation. ECR™ uses a high voltage electrostatic field and proprietary collector elements to remove the sub-micron particles. Typical causes of thermal degradation are pressure induced dieseling and element spark discharge.
ECR™ will return phosphate ester fluid that has turned dark back to its original color in hydraulic or lube oil. Ideal for steam turbine EHC systems with dark fluid. Visit the phosphate ester fluid maintenance products page to learn more about the complete solution for years of trouble free EHC system operation and how to extend the life of phosphate ester fluid indefinitely.
FC filter carts feature two DFE rated Hy-Pro spin-on elements in series to condition hydraulic fluids with two filter passes with each pass through the filter cart. Media options available down to 1 micron absolute, water removal media and stainless mesh media. Flow rates up to 22 gpm / 82 lpm with a variety of power options. Ideal for hydraulic fluid conditioning and cleaning oils during fluid transfer.
FCL filter carts feature a large element for conditioning high viscosity lubricants with high efficiency media selections down to 1 micron absolute, water removal and stainless mesh media. Flow rates available up to 22 gpm / 82 lpm with a several power options available. Ideal for high viscosity lube applications and filtering oil during fluid transfer.
FCL diesel coalescing filter carts feature a large combination coalesce/separator element to remove water from diesel fuel. High efficiency pre-filter removes particulate contamination. Flow rates available up to 22 gpm / 82 lpm with several power options available.
FCL turbine oil coalescing filter carts feature a large combination coalesce/separator element to remove water from turbine oil. High efficiency pre-filter removes particulate contamination. Flow rates available up to 5 gpm / 18 lpm with several power options available.
FPL dedicated filter panels feature two Hy-Pro DFE rated spin-on elements in series for two filter passes with each pass through the panel. Media options down to 1 micron absolute, water removal and stainless mesh. Flow rates up to 10 gpm / 37.5 lpm and a variety of power options. Ideal for compressor, hydraulic reservoir and dedicated fluid transfer applications.
Ideal for Maintenance of Steam Turbine EHC Fire Resistant Fluids.
- Prevent contamination related variable geometry valve failures, extend useful oil life.
- Remove & maintain Acid Number to < 0.05 with ICB™ element technology.
- Prevent & remove gels & deposit caused by other acid removal technologies (ICB™ technology removes dissolved metals).
- Integrated TMR™ N2 (Nitrogen generator) prevents airborne water & metal ion ingression, and removes combustible dissolved gasses (prevent micro-dieseling).
- Particulate & insoluble gel / sludge removal with high efficiency on-board filtration.
- Maintain water content below 200 ppm with TMR™ N2 and minimize acid producing hydrolysis.
Ideal for Maintenance of Aero-Derivative Jet Lube Oil & Hydraulic Systems
- Prevent contamination related variable geometry failures and extend useful oil life.
- Remove & maintain Acid Number to < 0.06 with element technology (Ion Charge Bonding by EPT).
- Prevent aero-derivative lube oil gel & deposit formation with ICB™ element technology.
- Maintain H2O to <200 ppm with TMR™ N2 and minimize acid production & slow oxidation.
- Optional TMR™ N2 (Nitrogen generator) prevents airborne water & metal ion ingression, and removes combustible dissolved gasses (prevent micro-dieseling).
- Particulate & insoluble gel / sludge removal with high efficiency on-board filtration.
FSL dedicated off-line filtration systems feature a large element for conditioning high viscosity lube oils with high efficiency element media options down to 1 micron absolute, water removal and stainless wire mesh. Ideal for coal mill and other gearbox applications and for cleaning & transferring high viscosity fluids. High flow rates and a range of power options. Dual stage FSL units give the flexibility to use water removal elements and high efficiency medias down to 1 micron absolute.
Remove water and particulate to extend fuel injector life and increase combustion engine fuel efficiency.
Ideal for permanent installation on-board sea vessels and diesel applications requiring compact size restrictions.
Remove contaminants, protect equipment.
FSLCOD combines high efficiency single pass particulate and water removal to ensure that your fuel is always in spec, eliminating premature injector failures and downtime.
Elements that go beyond industry standard.
With DFE rated particulate filters and 100% synthetic coalesce/separator elements that remove all free and emulsified water down to 50 ppm, your fuel rail and high pressure injectors will be protected and running more efficiently than ever.
Small has never been bigger.
Coming in at only 1 ft2 (30 cm2) of floor space and 34” (86 cm) tall, the FSLCOD is engineered to provide maximum efficiency in minimal space.
Designed for 24/7 unattended operation, FSLCOD‘s with auto water drain technologies, available electrically or mechanically powered, provide you with the safety and security to know your diesel is clean and dry even when you’re off the clock.
Increase fuel efficiency, lower emissions.
Cleaner fuel runs more efficiently and with lower emissions, yielding better injector performance and life and leading to lower fuel usage, translating to bottom line profitability and a drastically lower environmental footprint. Monitor your fuels’ condition with properly positioned sample ports before the pre-filter and after the coalesce stage and always know how your filtration is performing.
No detail overlooked.
From the cast iron gear pump with internal relief to the space saving design, every component of the FSLCOD is designed to provide you with the highest quality filtration and integrate seamlessly into your systems. So whether you’ve got a single vessel or an entire fleet, you can rest assured that your diesel is clean and dry.
FSLD High Viscosity / High Flow Dual Filter Systems provide dedicated off-line filtration with large elements for high viscosity lube oils. Media options to 1 micron absolute, water removal & stainless mesh. Ideal for coal mill and other gearbox applications.
A dedicated contamination solution for off-line conditioning and bulk oil handling. Dual housings allow flexibility in using staged element ratings to achieve remarkably clean fluids and hit target ISO Codes in fewer passes, all while extending filter element and oil lives. Ideal for conditioning reclaimed fluids or fluids with high dirt load.
Ideal for Maintenance of Small Turbine Lube Oil & Compressor Reservoirs.
- Prevent varnish related servo valve failures on small gas turbines and compressor lube oil applications (ie gas transmission compressor units).
- Remove & prevent varnish deposits with ICB™ element technology (Ion Charge Bonding).
- Achieve & maintain MPC value < 20 (lower varnish potential).
- Lower ISO codes to 14/12/9 with high efficiency post filter element.
- Extend life of anti-oxidant additives & prevent premature oil replacement.
Compact and compatible, the FSW is the perfect offline filtration system for removing contamination from your systems and making sure they remain in peak operating condition.
For Hydraulic and Lubricating Oil Heating Applications
- Low watt density heater elements prevent oil damage (no direct oil contact with element).
- Programmable temperature control with integral no-flow switch prevents oil damage from stopping oil with heater energized.
- Standard flow rates available to 100 gpm (375 lpm) plus.
- Achieve and maintain target ISO codes with high efficiency on-board filtration
- Large coreless filter elements yield low ISO codes & long filter element life
- Ideal for hydraulic fluids and high viscosity lubricating oils up to ISO VG680
The new Hy-PRO LCS changes everything!
Hy-Pro’s customizable Liquid Conditioning Station will organize your lube room and ensure that contaminants are taken out of your lube oil or hydraulic fluid before it ever enters your machine. Checkout the PDF linked below for more information.
When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect. SVR™ Soluble Varnish Removal skids prevent and remove varnish deposit formation in lube oil by removing oxidation by-products as they are formed and while they are still in solution (dissolved). By removing the soluble varnish feed stock SVR™ is addressing the primary cause of varnish before varnish deposits can form. Stop varnish before it stops you!
SVR™ restores the solubility of the oil by removing the soluble varnish causing contamination that other technologies can’t. By restoring solubility SVR™ enables the oil to chemically remove previously formed varnish deposits and reduce MPC varnish potential numbers from condition critical red to condition normal green. Ask us how the SVR™ 1200 can reduce and maintain a 6000 gallon GE Frame 7 lube reservoir MPC value to single digits in approximately 45 days.
The V1 mini vacuum dehydrator equipped with heater removes free and dissolved water from small reservoirs. This mini version of our VUD series machines is extremely portable and can operate on a 120VAC 1P 60Hz electrical circuit requiring < 20 Amps. The portability makes the V1 ideal for such applications as boiler feed pumps, FD & ID fans, ferries & work-boats, and any other small reservoir plagued with water contamination.
Check out our latest V1S case study!
The VUD vacuum dehydrators rapidly remove free & dissolved water from hydraulic & lube fluids up to ISO VG680. Achieve and maintain water levels to < 10 ppm. Intuitive design is easy to operate.
The VUD series vacuum dehydrators rapidly remove free & dissolved water from a range of hydraulic and lube fluids up to ISO VG680 lubricant. Achieve and maintain water levels down to 10 ppm for any sized reservoir. Applications include steel mill Morgoil systems, turbine lube reservoirs, oil flushing and reclamation, bio-diesel polishing, paper machine conditioning, and many more.
Vac-U-Dry is available up to 100 gpm with many features that set the Hy-Pro unit apart including:
- programmable thermostat and low watt density heaters
- foam sensing and knockdown circuit
- dual tank auto condensate water drain for 24×7 continuous unattended operation
- high efficiency particulate filtration
- flexible design options for any application
- smart relay start-up and shut-down routines for easy operation
- 4 vacuum pump choices to design your optimum unit