Contact us at

+603 3291 1899

Operating Hours

Mon - Fri 08:30 - 17:30

Proactive Strategic Reliability Sdn Bhd is the most trusted distributor in Malaysia for Taisei Kogyo Filtration Products and Heat Exchanger.

Reservoir Accessories

admin

BF Breathers

Control airborne contamination and extend the life of other filters in your system.  BF Breathers go beyond ineffective filter / breather caps to protect your system with high capacity, high efficiency pleated glass media elements.  Combine with Hy-Pro Filter Assemblies and Fluid Conditioning Equipment for the ultimate in Total Systems Cleanliness.

Hy-Dry Desiccant Breather

Hy-Dry desiccant breathers control moisture by adsorption and particulate mechanically down to 1 micron from entering reservoirs during air exchange.  Rugged designs are available high vibration mobile applications.  A wide range of breather sizes and reservoir adaptors are available to enhance any reservoir.  Fluid contamination is the root cause of most hydraulic system failures. Controlling airborne contamination is critical. The synergy of Hy-Pro fluid filter elements and Hy-Dry desiccant breathers yields fluid clarification and a healthy hydraulic system.  Desiccant beads change color signaling that is time to replace the breather.

 

Hydraulic & Lube Oil Contamination Reference Chart (39″ X 27″)

Water and particulate contamination reference chart for hydraulic and lube oil (39″ X 27″).  Contact Proactive Strategic Reliability Sdn Bhd (info@proactivereliability.com) to request your free copy today!

 

In-Tank Suction Strainer Mesh Elements

In-tank suction strainer mesh elements are available with nylon and corrosion resistant steel threaded end cap connections up to 3″ NPT and G threads.

 

 

Spin-On Breathers

Hy-Pro high efficiency high capacity spin-on breathers prevent contaminant ingression in to reservoirs, ideal for mobile applications.  Replace ineffective filler-breather caps.

 

TMR™ Reservoir Headspace Dehydrator

TMR™ introduces air with 150°F dew point suppression into reservoir headspace to maintain water levels < 300 ppm in EHC reservoir phosphate ester (to 1,000 gal / 3,750 liter reservoirs).

 

TMR™ N2 Active Headspace Dehydrator + Nitrogen Generator

TMR™ N2 is an active breather system that maintains the air in the headspace that continuously introduces clean dry Nitrogen. As the dry N2 transfers through the headspace at RH < 1% the oil gives up its water striving to achieve equilibrium with the dry Nitrogen in the headspace.

Nitrogen is an inert gas so it will also remove combustible gases (ie CO2, C2H2, CO, C2H4, C2H6, CH4, H2) from the oil to reduce oxidation and fluid breakdown.

Low Pressure Filters

admin

F8 Medium Pressure High Flow Base Mount Filter

500 psi / 35 bar max operating F8 housing features large DFE rated Hy-Pro coreless element in several designs including HP8314. Top loading housing is ideal for high viscosity lube oil and the port to port mounting dimensions are a match for industry standard 8300 configuration. Full flow bypass valve is integral in the housing top cover. Media efficiency options down to 1 micron absolute, water removal and stainless steel mesh are available.

Download Public PDF

LF/LFM High Flow Filter

LF / LFM high flow filter assemblies feature Hy-Pro DFE rated elements in single or multi-round configurations. Available in coated steel or stainless with pressure options up to 1500 psi / 102 bar.

LFW Wall Mounted Filter Assemblies

A compact, dedicated off-line contamination solution ideal for small reservoirs, gearboxes and diesel engine crankcase conditioning.

Coming in at a whopping 0 ft2 of floor space, the LFW is designed to get your filtration off the ground and positioned conveniently for you, whether you’re polishing off that high viscosity gearbox oil or just want to add a little more protection for your critical components from heavy contaminants. And with Hy-Pro filter elements inside, the possibilities are endless for what you can do with the LFW.

Download Public PDF

 

MF3 Medium Pressure In-Line Filter

MF3 medium pressure in-line filter with operating pressure up to 1200 psi / 83 bar features Hy-Pro DFE rated filter elements with media options down to 1 micron absolute, water removal and stainless steel mesh. MF3 is ideal for mobile equipment, hydrostatic charge circuits and is an excellent alternative to spin-on assemblies in off-line or return-line applications. MF3 is also a port to port dimension drop-in for 40CN housings and HK04 / HMK04 spin-on assemblies.

Download Public PDF

 

S409 Spin-On Filter

Hy-Pro DFE Rated HP409 series medium pressure spin-on element. Ideal for mobile equipment return-line and hydrostatic applications.

Download Public PDF

 

S75 -76 Spin-On Filter Assemblies

Low pressure spin-on assemblies with operating pressure to 200 psi / 14 bar are available in single and dual head designs to handle flow rates up to 100 gpm / 375 bar. Hy-Pro DFE  rated elements are available in a wide range of media options down to 1 micron absolute, water removal and stainless steel mesh. Ideal for mobile equipment HPUs & low pressure return or off-line circuits. Ask us about medium pressure spin-on assemblies.

Download Public PDF

 

TF4 Low Pressure In-Tank Return Filter

TF4 in-tank return filters with operating pressures to 150 psi / 10 bar feature Hy-Pro coreless elements or optional HF4 auto spec element. Compact alternative to spin-ons for HPUs & mobile hydraulic systems.

TF4 in-tank return filter operating pressures to 150 psi / 10 bar Hy-Pro DFE rated coreless elements or optional HF4 automotive spec elements. TF4 is an ideal compact alternative to spin-ons for HPU return-lines and mobile equipment hydraulic systems. Media options down to 1 micron absolute, water removal and stainless steel mesh.

Download Public PDF

 

TFR Low Pressure In-Tank Return Filter

TFR in-tank return filter operating pressures to 150 psi / 10 bar feature inside to out flow direction elements with integral bypass valve. Ideal for HPUs & mobile equipment hydraulic systems.

TFR in-tank return filter operating pressures to 150 psi / 10 bar and flow rates to 300 gpm / 1100 lpm with coarse glass media options. TFR features  DFE rated inside to out flow direction elements to contain captures contaminant during element service (particles don’t run off into the reservoir). Each element has an integral bypass valve which prevents bypass valve spring fatigue and leaking (new bypass valve with every element change). Ideal for HPU return-lines and mobile equipment hydraulics.

Download Public PDF

High Pressure Filters

admin

PF2 In-Line or Manifold Pressure Filter

PF2 pressure filter max operating 4000 psi / 207 bar.  Ideal for protecting servo valves and other sensitive components.

PF2 in-line or manifold mount pressure housing max recommended operating 4000 psi / 207 bar.  Ideal for protecting servo valves and other low flow sensitive components.  Features DFE rated filter elements.  Available in bypass or non-bypass configuration.

Download Public PDF

PF4 High Pressure Base Mounted Filter

The PF4 high pressure filter with max recommended operating pressure 5000 psi / 350 bar features Hy-Pro DFE rated coreless filter elements or optional HF4 automotive specification.  With three available length configurations PF4 can handle a wide range of flow rates and is ideal for HPU pump discharge applications.

PFH High Pressure In-Line Filter

PFH high pressure filter series with max operating 8700 psi / 615 bar is available in four sizes to handle applications from pilot actuator valves to high flow pump discharge.  Rugged steel construction and DFE  rated filter elements provide lower ISO codes for the toughest industrial and mobile installations.

 

PFHB Bi-Directional Flow Pressure Filter

The PFHB bi-directional filter filters fluids in both directions and is not another high pressure that filters in one direction and has reverse flow check or bypass valve built into the housing.  Max recommended operating pressure 6200 psi / 450 bar makes the PFHB ideal for protecting large cylinders or hydrostatic loop circuits.  In large cylinder applications fluid is typically trapped in the lines and never makes it back to the reservoir.  With the PFHB in-line between cylinder and reservoir this can go from one of the dirtiest systems in a plant to one of the cleanest ensuring cylinder reliability.

Download Public PDF

 

PFQ290218V Westinghouse Housing Extension Tube

Filter housing extension tubes & element upgrades for Westinghouse EHC system hydraulic power unit pump discharge filters (2 per pump).

Filter housing extension tubes & element upgrades for Westinghouse EHC system hydraulic power unit pump discharge filters (2 per pump). Housing extension + longer element (double surface area) prevents high element Dp pressure problems. Upgrade 10-15m element to 3m for cleaner fluid and increased reliability of hydraulic actuator servo valves.

Download Public PDF

Duplex Filter Assemblies

admin

DFH High Pressure Duplex Filter

DFH high pressure duplex operating pressures up to 3000 psi / 210 bar and flow rates up to 58 gpm / 184 lpm with DFE rated glass media element options.  DFH allows for element servicing without interrupting must have continuous hydraulic system operation.  Ideal for critical hydraulic systems such as HPU pump discharge, power gen EHC systems, wind turbine and marine hydraulics.

Download Public PDF

DFN Low Pressure Duplex

DFN duplex operating pressures up to 888 psi / 63 bar and flow rates up to 58 gpm / 184 lpm with DFE rated glass media element options and higher with wire mesh media.  DFN allows for element servicing without interrupting must have continuous hydraulic & lube system operation.  Ideal for 24×7 critical systems such as  turbine seal oil, boiler feed pumps, FD-ID fan lube oil and more.  Upgrade antiquated Auto-Kleen filters to DFN.

 

DLF/DLFM High Flow Duplex

DLF / DLFM high flow duplex assemblies with operating pressure options up to 1,500 psi / 102 bar are available in coated steel or stainless steel materials to suit any fluid. Hy-Pro DFE rated coreless elements are available in a wide range of medias to handle any application from high viscosity lubricants to diesel fuel. DLF / DLFM duplexes allow filter element servicing without interrupting must have system flow and are ideal for critical high speed bearing lube pumping skids and other high flow applications.

Download Public PDF

Fluid Conditioning Equipment

admin

CFU Compact Filter Unit

The CFU series portable Compact Filter Unit is designed for small gearboxes or reservoir conditioning and fluid transfer. The pneumatic driven pump option is ideal for explosion proof environment and material delivery systems as well as conveyors with many small gearboxes. The configuration of two elements in series reduces fluid processing time and allows balanced use of high efficiency glass media that can be combined with water removal capabilities.

Weight: 30 Lbs (14 Kg) – 55 Lbs (25 Kg)

Dimensions: 14″ (356 mm) W x 17.5″ (445 mm) L x 20″ (508 mm) H

Download Public PDF

COD Diesel Fuel Conditioning Skid

COD coalesce skids rapidly remove water from diesel fuel > 99% single pass water removal efficiency and high efficiency particulate filtration.

COD coalesce skids rapidly remove water from diesel fuel > 99% single pass water removal efficiency and high efficiency particulate filtration.  Units available up to 200 gpm / 750 lpm for high volume treatment of bulk diesel tanks. Typical applications include diesel tank farm bulk fluid conditioning, tanker truck filling transfer and filtration, stand-by diesel storage tanks (hospitals, emergency response), and more.

Diesel fuel cleanliness is more critical than ever with increasing combustion pressures and sensitivity of fuel injectors.  Keep diesel fluids clean for reliable and fuel efficient engine operation and to keep stand-by fuel reserves ready for service.

Download Public PDF

COT Turbine Oil Coalesce Skid

COT turbine oil coalesce skids rapidly remove water from turbine oil with > 95% single pass efficiency, control particulate to 16/14/11 and lower. COT skids are available to handle reservoirs up to 20,000 gallons and feature all synthetic media elements for pre-filter, coalesce, separation and post-filter.

Auto-water drain allows for 24×7 continuous unattended operation. On-board heaters help keep turbine lube reservoir warm even when the turbine is down maximizing coalesce efficiency and ensuring that fluid is in pristine condition when the turbine is ready to come back on-line.

Download Public PDF

ECR™ Electrostatic Contamination Removal Skid

ECR™ electrostatic removes submicron particles created by thermal degradation in hydraulic or lube oil.  Ideal for steam turbine EHC systems with dark fluid.

ECR™ electrostatic contamination removal system captures sub-micron carbon based particles that are the by-product of hydraulic and lube oil thermal degradation.  ECR™ uses a high voltage electrostatic field and proprietary collector elements to remove the sub-micron particles.  Typical causes of thermal degradation are pressure induced dieseling and element spark discharge.

ECR™ will return phosphate ester fluid that has turned dark back to its original color in hydraulic or lube oil.  Ideal for steam turbine EHC systems with dark fluid.  Visit the phosphate ester fluid maintenance products page to learn more about the complete solution for years of trouble free EHC system operation and how to extend the life of phosphate ester fluid indefinitely.

Download Public PDF

FC Offline Filter Cart

FC filter carts feature two DFE rated Hy-Pro spin-on elements in series to condition hydraulic fluids with two filter passes with each pass through the filter cart.  Media options available down to 1 micron absolute, water removal media and stainless mesh media.  Flow rates up to 22 gpm / 82 lpm with a variety of power options.  Ideal for hydraulic fluid conditioning and cleaning oils during fluid transfer.

Download Public PDF

FCL High Viscosity Filter Cart

FCL filter carts feature a large element for conditioning high viscosity lubricants with high efficiency media selections down to 1 micron absolute, water removal and stainless mesh media.  Flow rates available up to 22 gpm / 82 lpm with a several power options available.  Ideal for high viscosity lube applications and filtering oil during fluid transfer.

 

FCLCOD Diesel Coalescing Filter Cart

FCL diesel coalescing filter carts feature a large combination coalesce/separator element to remove water from diesel fuel.  High efficiency pre-filter removes particulate contamination.  Flow rates available up to 22 gpm / 82 lpm with several power options available.

 Download Public PDF

FCLCOT Turbine Oil Conditioner/Purifier Cart

FCL turbine oil coalescing filter carts feature a large combination coalesce/separator element to remove water from turbine oil. High efficiency pre-filter removes particulate contamination. Flow rates available up to 5 gpm / 18 lpm with several power options available.

Download Public PDF

FPL Dedicated Spin-On Filter Panel

FPL dedicated filter panels feature two Hy-Pro DFE rated spin-on elements in series for two filter passes with each pass through the panel.  Media options down to 1 micron absolute, water removal and stainless mesh.  Flow rates up to 10 gpm / 37.5 lpm and a variety of power options.  Ideal for compressor, hydraulic reservoir and dedicated fluid transfer applications.

Download Public PDF

FSA(PE) Fluid Conditioning for Phosphate Ester

Ideal for Maintenance of Steam Turbine EHC Fire Resistant Fluids.

  • Prevent contamination related variable geometry valve failures, extend useful oil life.
  • Remove & maintain Acid Number to < 0.05 with ICB™ element technology.
  • Prevent & remove gels & deposit caused by other acid removal technologies (ICB™ technology removes dissolved metals).
  • Integrated TMR™ N2 (Nitrogen generator) prevents airborne water & metal ion ingression, and removes combustible dissolved gasses (prevent micro-dieseling).
  • Particulate & insoluble gel / sludge removal with high efficiency on-board filtration.
  • Maintain water content below 200 ppm with TMR™ N2 and minimize acid producing hydrolysis.

Download Public PDF

 

FSJL Aero-Derivative Jet Lube Oil Conditioning

Ideal for Maintenance of Aero-Derivative Jet Lube Oil & Hydraulic Systems

  • Prevent contamination related variable geometry failures and extend useful oil life.
  • Remove & maintain Acid Number to < 0.06 with  element technology (Ion Charge Bonding by EPT).
  • Prevent aero-derivative lube oil gel & deposit formation with ICB™ element technology.
  • Maintain H2O to <200 ppm with TMR™ N2 and minimize acid production & slow oxidation.
  • Optional TMR™ N2 (Nitrogen generator) prevents airborne water & metal ion ingression, and removes combustible dissolved gasses (prevent micro-dieseling).
  • Particulate & insoluble gel / sludge removal with high efficiency on-board filtration.

Download Public PDF

FSL Dedicated Off-Line Filtration

FSL dedicated off-line filtration systems feature a large element for conditioning high viscosity lube oils with high efficiency element media options down to 1 micron absolute, water removal and stainless wire mesh.  Ideal for coal mill and other gearbox applications and for cleaning & transferring high viscosity fluids.  High flow rates and a range of power options.  Dual stage FSL units give the flexibility to use water removal elements and high efficiency medias down to 1 micron absolute.

Download Public PDF

FSLCOD Compact Diesel Coalescing Filtration System

Remove water and particulate to extend fuel injector life and increase combustion engine fuel efficiency.

Ideal for permanent installation on-board sea vessels and diesel applications requiring compact size restrictions.

Remove contaminants, protect equipment.

FSLCOD combines high efficiency single pass particulate and water removal to ensure that your fuel is always in spec, eliminating premature injector failures and downtime.

Elements that go beyond industry standard.

With DFE rated particulate filters and 100% synthetic coalesce/separator elements that remove all free and emulsified water down to 50 ppm, your fuel rail and high pressure injectors will be protected and running more efficiently than ever.

Small has never been bigger.

Coming in at only 1 ft2 (30 cm2) of floor space and 34” (86 cm) tall, the FSLCOD is engineered to provide maximum efficiency in minimal space.

Smarter filtration.

Designed for 24/7 unattended operation, FSLCODs with auto water drain technologies, available electrically or mechanically powered, provide you with the safety and security to know your diesel is clean and dry even when you’re off the clock.

Increase fuel efficiency, lower emissions.

Cleaner fuel runs more efficiently and with lower emissions, yielding better injector performance and life and leading to lower fuel usage, translating to bottom line profitability and a drastically lower environmental footprint. Monitor your fuels’ condition with properly positioned sample ports before the pre-filter and after the coalesce stage and always know how your filtration is performing.

No detail overlooked.

From the cast iron gear pump with internal relief to the space saving design, every component of the FSLCOD is designed to provide you with the highest quality filtration and integrate seamlessly into your systems. So whether you’ve got a single vessel or an entire fleet, you can rest assured that your diesel is clean and dry.

Download Public PDF

FSLD High Viscosity Dual Filter Systems

FSLD High Viscosity / High Flow Dual Filter Systems provide dedicated off-line filtration with large elements for high viscosity lube oils.  Media options to 1 micron absolute, water removal & stainless mesh.  Ideal for coal mill and other gearbox applications.

A dedicated contamination solution for off-line conditioning and bulk oil handling. Dual housings allow flexibility in using staged element ratings to achieve remarkably clean fluids and hit target ISO Codes in fewer passes, all while extending filter element and oil lives. Ideal for conditioning reclaimed fluids or fluids with high dirt load.

Download Public PDF

FSTO Turbine Lube Oil Varnish Removal

Ideal for Maintenance of Small Turbine Lube Oil & Compressor Reservoirs.

  • Prevent varnish related servo valve failures on small gas turbines and compressor lube oil applications (ie gas transmission compressor units).
  • Remove & prevent varnish deposits with ICB™ element technology (Ion Charge Bonding).
  • Achieve & maintain MPC value < 20 (lower varnish potential).
  • Lower ISO codes to 14/12/9 with high efficiency post filter element.
  • Extend life of anti-oxidant additives & prevent premature oil replacement.

Download Public PDF

FSW Wall Mounted Filtration System

Compact and compatible, the FSW is the perfect offline filtration system for removing contamination from your systems and making sure they remain in peak operating condition.

Download Public PDF

HS Heater Skid

For Hydraulic and Lubricating Oil Heating Applications

  • Low watt density heater elements prevent oil damage (no direct oil contact with element).
  • Programmable temperature control with integral no-flow switch prevents oil damage from stopping oil with heater energized.
  • Standard flow rates available to 100 gpm (375 lpm) plus.
  • Achieve and maintain target ISO codes with high efficiency on-board filtration
  • Large coreless filter elements yield low ISO codes & long filter element life
  • Ideal for hydraulic fluids and high viscosity lubricating oils up to ISO VG680

Download Public PDF

LCS Liquid Conditioning Station

The new Hy-PRO LCS changes everything!

Hy-Pro’s customizable Liquid Conditioning Station will organize your lube room and ensure that contaminants are taken out of your lube oil or hydraulic fluid before it ever enters your machine.  Checkout the PDF linked below for more information.

Download Public PDF

SVR Soluble Varnish Removal Skid

When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect.  SVR™ Soluble Varnish Removal skids prevent and remove varnish deposit formation in lube oil by removing oxidation by-products as they are formed and while they are still in solution (dissolved).  By removing the soluble varnish feed stock SVR™  is addressing the primary cause of varnish before varnish deposits can form.  Stop varnish before it stops you!

SVR™ restores the solubility of the oil by removing the soluble varnish causing contamination that other technologies can’t.  By restoring solubility SVR™ enables the oil to chemically remove previously formed varnish deposits and reduce MPC varnish potential numbers from condition critical red to condition normal green.  Ask us how the SVR™ 1200 can reduce and maintain a 6000 gallon GE Frame 7 lube reservoir MPC value to single digits in approximately 45 days.

Download Public PDF

V1 Compact Vacuum Dehydrator

The V1 mini vacuum dehydrator equipped with heater removes free and dissolved water from small reservoirs. This mini version of our VUD series machines is extremely portable and can operate on a 120VAC 1P 60Hz electrical circuit requiring < 20 Amps. The portability makes the V1 ideal for such applications as boiler feed pumps, FD & ID fans, ferries & work-boats, and any other small reservoir plagued with water contamination.

Check out our latest V1S case study!

Download Public PDF

 

VUD Vac-U-Dry Vacuum Dehydrator

The VUD vacuum dehydrators rapidly remove free & dissolved water from hydraulic & lube fluids up to ISO VG680.  Achieve and maintain water levels to < 10 ppm.  Intuitive design is easy to operate.

The VUD series vacuum dehydrators rapidly remove free & dissolved water from a range of hydraulic and lube fluids up to ISO VG680 lubricant.  Achieve and maintain water levels down to 10 ppm for any sized reservoir.  Applications include steel mill Morgoil systems, turbine lube reservoirs, oil flushing and reclamation, bio-diesel polishing, paper machine conditioning, and many more.

Vac-U-Dry is available up to 100 gpm with many features that set the Hy-Pro unit apart including:

  • programmable thermostat and low watt density heaters
  • foam sensing and knockdown circuit
  • dual tank auto condensate water drain for 24×7 continuous unattended operation
  • high efficiency particulate filtration
  • flexible design options for any application
  • smart relay start-up and shut-down routines for easy operation
  • 4 vacuum pump choices to design your optimum unit

Download Public PDF

1 2
Chat with expert now
1
We're Expert in Filtration. Need help?
PSR The Expert in Industrial Filtration
Hi, you have an interest in our product features, trials, demos, or anything else, our team is ever ready to help!